Part Number: F203-00A-212-00
Potential alternative for the following AAL series inclinometer part numbers from TE Connectivity/Measurement Specialties/HL Planar: NS-2/AAL2-UDD, NS-5/AAL2-UDD, NS-10/AAL2-UFG, NS-10/AAL2-UDG, NS-15/AAL2-UDG, NS-30/AAL2-UDN.
Caratteristiche e vantaggi:
- ±3° operating range, ±1° linear range inclinometer
- ±0.001° repeatability angle measurements
- Inclinometro a doppio/doppio asse di misura
- Simple to use analog 0 to 5 V DC output and RS-232 digital communications
- Tensione di alimentazione da 7 a 16 V CC
- Progettazione a livello di scheda PCB per una semplice integrazione
- Eccellente assistenza clienti
The F203-00A-212-00 dual-axis high-precision analog and digital inclinometer sensor with analog 0 to 5 V DC outputs for each axis. It also has RS-232 digital communications with a 16-bit unsigned angular position measurement output. It is designed and manufactured by Fredericks for use in structural monitoring applications, construction tools, and other applications where a very high precision, industrial-grade solution is required. This high-precision digital inclinometer sensor utilizes two Fredericks 0703-0712-99 narrow-range single-axis electrolytic tilt sensors and is mounted on our 1-6200-012 16-bit analog and RS-232 signal conditioner to provide the most accurate angle measurements.
The use of our high-accuracy single-axis sensors and the 16-bit ADCs and DACs on the 1-6200-012 signal conditioner make this inclinometer are what make this one of our highest precision products. Our specialized manufacturing techniques give this unit superior tolerances and unit-to-unit performance. It is an excellent solution for a versatile range of applications in many sectors.
The Fredericks Company’s inclinometers take our proven electrolytic tilt sensors and combine them with electrolytic tilt sensor circuits to make inclinometer solutions for use in various markets and applications. Electrolytic tilt sensing technology makes these inclinometers extremely stable with minimal long-term drift compared to MEMS devices. It is an easy-to-use inclinometer package that’s simple to integrate.
Interfaccia digitale | RS-232 |
Uscita analogica | 0 ... 5 V DC |
Tensione di alimentazione | 7 V DC a 16 V DC |
Corrente di alimentazione | <10 mA |
Campo di funzionamento | ±3º |
Gamma lineare | ±1º |
Ripetibilità | ±0.001° |
Risoluzione | ≤0.001° |
Offset Nullo | ±2° |
Long Term Stability/Drift | ≤0.005° |
Coefficiente di temperatura nullo | ≤0.0005° per °C |
Scale Temperature Coefficient (±1°) | 0.375% |
I materiali | Contains magnetic metals |
Temperatura di esercizio | da -20 °C a 50 °C |
Temperatura di stoccaggio | -40 °C to 100 °C |
Time Constant (63.2% of output) | ≤1 secondo |
Gamma lineare
Campo di funzionamento
Alloggiamento | Nessuno |
Collegamenti elettrici | 8-pin Molex 0015910080 |
Mating Connector | 8-Pin Molex 0022552081 |
Peso | 20 g |
Lunghezza | 45 mm (1.78”) |
Larghezza | 45 mm (1.78”) |
Altezza | 11 mm (0.43”) |
Pin 1 | Gnd | Ground |
Pin 2 | Gnd | Ground |
Pin 3 | VCC | Supply Voltage (+) |
Pin 4 | Gnd | Ground |
Pin 5 | RX | RS-232 Receieve |
Pin 6 | Xa | X Analog Output (0 to 5 V DC) |
Pin 7 | Ya | Y Analog Output (0 to 5 V DC) |
Pin 8 | TX | RS-232 Transmit |
RS-232 Information
Baud Rate | 9600 (default, selectable up to 115200) |
Data Bits | 8 |
Parity | Nessuno |
Stop Bits | 1 |
RS-232 Commands
‘x’ or ‘X’ | X axis output (0 to 65535) |
‘y’ or ‘Y’ | Y axis output (0 to 65535) |
‘t’ or ‘T’ | Temperature output (0 to 1023) |
‘s’ or ‘S’ | Output X, Y, temperature at set intervals |
‘r’ or ‘R’ | Stop timed interval output |
‘1’ to ‘5’ | Set delay (in seconds) for set intervals |
‘v’ or ‘V’ | Product information and version |
‘B1’ | Set baud rate to 9600 |
‘B2’ | Set baud rate to 19200 |
‘B3’ | Set baud rate to 38400 |
‘B4’ | Set baud rate to 57600 |
‘B5’ | Set baud rate to 115200 |
‘?’ | List all commands |
Conforme alla direttiva RoHS |
Documentazione del prodotto
Scheda tecnica F203-00A-212-00 |
F203-00A-212-00 STEP File |
Arduino Analog Communications INO File |
Arduino RS-232 Communications INO File |
Case Studies
Caso di studio di monitoraggio strutturale: Resensys |
Note applicative
Strumenti
Convertitore di misure angolari |
Video
Che cos'è un sensore di inclinazione elettrolitico? |
Brochures
Catalogo dei prodotti per la misurazione dell'inclinazione |
Download STEP File
Numero di parte | Descrizione | STEP File |
F203-00A-212-00 | ±3° Analog/RS-232 Inclinometer | Download |
Monitoraggio geotecnico e strutturale |
Construction Machinery and Equipment |
Laser Leveling Lystems |
Railway Monitoring |
Medical Devices |
Mining Machinery and Equipment |
F203-00A-212-00 Quantity Discounts
Quantità | Prezzo |
1 | $335.97 |
10 | $319.36 |
100 | $289.34 |
500 | $271.69 |
1000+ | $261.17 |