信号调节器 - 电解倾斜传感器电路
Fredericks 制造了一系列完整的信号调节板、倾角计和倾斜开关,其中包括我们行业领先的倾斜传感器。这些高精度的传感器和电子器件包括从印刷电路组件和全集成封装到远程安装的传感器和组件。
Available in single and dual-axis, our tilt sensor assemblies are highly configurable and provide you with an output signal proportional to tilt angle. These electronics can be used with any of our Fredericks metal, glass, or ceramic tilt sensors.
Tilt sensor electronics custom-built for your needs
如果您的应用需要定制传感器组件,我们可以根据您的具体规格设计和制造电子元件。电子器件可以以各种方式进行封装,为您提供方便的安装、多种输出选择和环境保护。
信号调节器 - 电解倾斜传感器电路
Electrolytic tilt sensors require a basic electrolytic tilt sensor circuit to generate a tilt angle output. These are often called signal conditioners, signal conditioning boards, or electronic tilt sensors. In most cases, our sensors can be mounted directly onto the PCB. These electrolytic tilt sensor circuits have many optional outputs including analog 0 to 5 V DC, RS-232/RS-485, PWM, and SPI communications.
Our electronic tilt sensors include convenient mounting holes and connectors allowing you to simply integrate our circuits into your designs. If you’d prefer to integrate our electrolytic tilt sensor circuit into your board-level design, we have an engineering department that can help! We have electrical, PCB layout, software/firmware, and mechanical design expertise, so we’ll work with you to build an electronic tilt sensor specific to your needs.
电解倾角计传感器
The electrolytic versions of our analog and digital inclinometer sensors utilize our Fredericks electrolytic tilt sensors and electrolytic tilt sensor circuits are the lowest cost environmentally sealed (up to IP66) inclinometer sensors we offer with a measurement range up to ±60° and repeatability from ±0.1° to ±0.05° in one or two axes. These inclinometer sensors have plastic housings and have a cable with flying leads that can be customized with a connector you specify. Optional outputs for our inclinometer sensors include analog 0 to 5 V DC, RS-232, RS-485, and UART/TTL digital communications.
倾斜开关
Our tilt switches (also referred to as a safety switch or tilt switch sensor module) are very similar to our inclinometers, but instead of a continuous output, tilt switches have a discrete on/off output from either a relay or an open collector. The angle where the tilt switch output changes can be set to specific ranges in one or two axes, up to ±45° tilt. These tilt switches come in plastic or metal housings, environmentally sealed up to IP66, with a cable and flying leads that can be customized with almost any connector you specify. The trip angle can be set by us at the factory or set and reset by you in the field.
The nature of the relay and open collector outputs make these units ideal for various tilt switch applications like construction vehicles and agricultural vehicles. More specific tilt switch applications include boom lifts, scissor lifts, and agricultural sprayers.
To learn more about the principles of tilt sensing and how to integrate tilt switch sensor modules into your application, see our Technical Information page.