Número de parte: 2-7900-034
Compatible con: 1E Diafragma piezoeléctrico, 1F Diafragma piezoeléctrico, 2A Termopar, 2A VacuMini, 2A NASA Mini, 4A Convección, 7B Cátodo frío , 7E Cátodo frío, 7F Cátodo frío , 7FC Cá todo frío, 7FCS Cátodo frío, CDG, Relés de punto de ajuste
Características y beneficios:
- 1*10-11 to 10,000 Torr maximum pressure measurement range
- Highly configurable, rack mountable design
- RS-232, RS-485, USB communications (need EthernetIP?)
- Up to 10 configurable analog outputs (0 to 10 V DC) and up to 8 set point relay outputs
- Pantalla OLED de alto contraste con un ángulo de visión de 180°.
- Unidades de medida seleccionables (Torr, mbar, Pascal)
- Supports nitrogen/air, argon, hydrogen, helium, neon, krypton, carbon dioxide gases
- ISO 17025 accredited and NIST-traceable calibrations available
The Televac® MX200 vacuum controller (also called a vacuum control unit or vacuum pressure controller) can be connected to up to 10 Televac® passive vacuum gauges including cold cathode gauges, convection gauges, piezo and capacitance diaphragm gauges, and thermocouple vacuum gauges. This gives it a maximum pressure measurement range of 1*10-11 to 10,000 Torr.
It also includes 0 to 10 V DC analog outputs for each vacuum gauge connected to the vacuum controller, RS-232/RS-485/USB digital communications for simple integration with a PC or PLC, and up to 8 optional set point relays for process control in your vacuum system.
The MX200 vacuum controller’s user interface includes six touch controls and a high contrast OLED display with a 180° viewing angle, which shows measurements from up to 8 connected vacuum gauges simultaneously along with the selected units of measurement and the status of set point relays. It also includes auto-scaling of the text size based on the number of measurements displayed.
This vacuum control unit supports multiple gas types including nitrogen/air, argon, hydrogen, helium, neon, krypton, and carbon dioxide. The MX200 vacuum controller is a configurable and modular unit, allowing you to choose a vacuum sensing solution specific to your needs.
Looking for active vacuum gauges instead of a controller? Check out our active gauges. Need a passive vacuum gauge to go with your MX200? Check out our passive vacuum gauges. Want to configure an MX200 and get a quote? Check out our MX200 configurator.
Instrumento | Número de parte | |
Unidad base MX200 USB/RS-232/RS-485 | 2-7900-034 | |
Unidad base MX200 USB/EthernetIP | 2-7900-037 | |
Módulo | Número de parte | Ranura (máx.) |
Punto de ajuste del relé cuádruple | 2-6200-411 | 1 (2) |
1E Diafragma de doble piezoeléctrico | 2-6200-220 | 1 (5) |
1F Diafragma de doble piezoeléctrico | 2-6200-244 | 1 (5) |
2A Termopar doble | 2-6200-486 | 1 (5) |
4A Doble convección | 2-6200-415 | 1 (5) |
7B Cátodo frío de magnetrón de Penning | 2-6200-227 | 2 (3) |
7EF DI Magnetron Cold Cathode | 2-6200-285 | 1 (5) |
Diafragma de capacidad | 2-6200-452 | 1 (5) |
Rango de operación | 1*10-11 Torr to 10,000 Torr |
Comunicaciones | USB/RS-232/RS-485 |
Salida analógica | 0 a 10 V DC (1 por sensor) |
Resolución de la salida analógica | 16 Bits |
Puntos de ajuste programables | 4 por módulo (8 máximo) |
Tipo de punto de ajuste | Relevo |
Voltaje de suministro | 115/230 V AC (2/1 A), 50-60Hz |
Máxima potencia | 230 W |
Medio de calibración | Aire seco o nitrógeno |
Temperatura de funcionamiento | 0 °C a 50 °C |
Temperatura de almacenamiento | -20 °C a 70 °C |
Distancia de lectura de la pantalla | 5 m (16 pies) |
Sensores máximos controlados | 10 |
Sensores máximos mostrados | 8 |
Tiempo de respuesta | ≤10 ms |
RS-232 D-Sub 9 Pin | Descripción |
D-Sub Pin 1 | Ground |
D-Sub Pin 2 | RS-232 TX |
D-Sub Pin 3 | RS-232 RX |
D-Sub Pin 4 | No Connection |
D-Sub Pin 5 | Ground |
D-Sub Pin 6 | No Connection |
D-Sub Pin 7 | Ground |
D-Sub Pin 8 | No Connection |
D-Sub Pin 9 | Ground |
RS-485 3 Pin | Descripción |
3-Pin Pin 1 | RS-485 B (+) |
3-Pin Pin 2 | RS-485 A (-) |
3-Pin Pine 3 | Ground |
Otros | Descripción |
USB | USB communications |
Setup lock | Front panel lock switch |
BTLD | Bootload button |
The MX200 has up to eight relay set points. The relays are located on two optional relay modules with four set points each. Individual relay statuses are displayed on the front panel. The heavy-duty relays have an SPDT (1 Form C) contact form and are rated for 24 V DC. They have a maximum current rating of 8 A at 250 V AC or 5 A at 30 V DC.
Vivienda | Aluminio |
Conexiones eléctricas | Power cord (IEC 60320 C-13) |
Weight (Base Unit) | 2.2 kg (5 lbs) |
Certified to UL 61010-1 |
CE certified to EN61326-1:2006 |
Certified to CAN/CSA C22.2 No. 61010-1-12 |
EAC certified |
ISO 17025 accredited calibration optional |
NIST-traceable calibration optional |
Documentación del producto
Hoja de datos del MX200 |
Manual de instrucciones del MX200 |
Televac®️ Vacuum Calibration Tolerances |
3D Model (STEP File)
MX200 Vacuum Controller STEP File |
Case Studies
Estudio de caso: Laboratorio Nacional de Argonne |
Notas de aplicación
Televac®️ Application Note 3008: MX200 to PC Interfacing and Communications |
Televac®️ Application Note 3011: MX200 and MM200 Analog Output Comparisons |
Herramientas
MX200 Online Order Hub |
Convertidor de medición de vacío Televac® |
Videos
MX200 Demonstration Video |
Brochures
Download STEP File
Número de parte | Descripción | STEP File |
2-7900-03X | Controlador de vacío MX200 | Download |