Descrizione
This application note explains the process for changing the MM200 analog output settings from a Windows 7 PC. The serial communications program Tera Term must be installed prior to following these instructions, and a serial to USB converter must be purchased. If you don’t have Tera Term installed, click here to download.
Istruzioni
1. Plug the serial to USB converter into your PC.
2. Aprire il menu Start.
3. Aprire il Pannello di controllo.
4. Open Hardware and Sound.
5. Aprire la Gestione periferiche.
6. Espandere il menu a tendina Porte (COM e LPT).
7. Determine the COM port assignment for your USB to serial converter, in this example the converter is assigned to COM3.
8. Open TeraTerm.
9. Aprire il menu Impostazione e selezionare l'opzione Porta seriale....
10. Change the Port setting to the COM port for your USB to serial converter, in this example it is COM3.
11. Ensure that the remainder of the settings are the following, then select OK:
- Velocità di trasmissione: 9600
- Dati: 8 bit
- Parità: nessuna
- Stop: 1 bit
- Controllo di flusso: nessuno
- Ritardo di trasmissione: 0 msec/char, 0 msec/linea
12. Open the Setup menu and select the Terminal setup… option
13. Assicurarsi che le impostazioni siano le seguenti, quindi selezionare OK:
- Ricevere: CR+LF
- Trasmettere: CR+LF
- Controllo dell'eco locale
14. Send the following commands to change the analog output setting, this example changes the 7B output to Linear (<CR> is equivalent to pressing the Enter key). A full list of commands and analog output options can be found in the table below.
- R7BN<CR>
- SE<CR>
Sensore | Comando | Nome | Gamma (Torr) | V/Divisione | Descrizione |
1E/F | R1EN | Lineare | 1/100 a 1000/10.000 | Da 0 a 10 V | 10 V = 1000/10.000 Torr |
1E/F | R1EM | Lineare/Decennale | 1/100 a 1000/10.000 | 2,00 V/Decade | 10 V = 1000/10.000 Torr |
1E/F | R1EL | Logaritmica | 1/100 a 1000/10.000 | 3,33 V/Decade | 10 V = 1000/10.000 Torr |
2A | R2AN | Lineare | 10-3 a 1 | Da 0 a 10 V | 10 V = 1 Torr |
2A | R2AL | Logaritmica | 10-3 a 1 | 3,33 V/Decade | 10 V = 1 Torr |
2A | R2AT | Tradizionale | Da 10-3 a 20 | Da 0 a 10 V | 10 V = 10-3 Torr |
2A | R2AR | Revisione lineare | 10-3 a 1 | Da 0 a 10 V | 10 V = 10-3 Torr |
3F | R3FM | Lineare/Decennale | 10-11 a 10-2 | 1,00 V/Decade | 10 V = 10-2 Torr |
3F | R3FL | Logaritmica | 10-11 a 10-2 | 1,00 V/Decade | 10 V = 10-2 Torr |
3F | R3Fx | Lineare | Da 10-2 a 10x | Da 0 a 10 V | 10 V = 10-8<-x<-2 Torr |
4A | R4AN | Lineare/Decennale | 10-3 a 1000 | 1,00 V/Decade | 10 V = 1000 Torr |
4A | R4AU | Lineare | 10-3 a 1 | Da 0 a 10 V | 10 V = 1 Torr |
4A | R4AT | Lineare | 10-3 a 10 | Da 0 a 10 V | 10 V = 10 Torr |
4A | R4AL | Logaritmica | 10-3 a 1000 | 1,67 V/Decade | 10 V = 1000 Torr |
5A/B/C/D/D/E/F | R5AN | Lineare | Scala completa | Da 0 a 10 V | 10 V = Scala completa |
5A/B/C/D/D/E/F | R5AL | Logaritmica | 3 Decenni | 3,33 V/Decade | 10 V = Scala completa |
7B | R7BM | Lineare/Decennale | 10-7 a 10-3 | 2,00 V/Decade | 10 V = 10-3 Torr |
7B | R7BL | Logaritmica | 10-6 a 10-3 | 3,33 V/Decade | 10 V = 10-3 Torr |
7B | R7BE | Logaritmica estesa | 10-7 a 10-3 | 2,50 V/Decade | 10 V = 10-3 Torr |
7B | R7BN | Lineare | 10-6 a 10-3 | Da 0 a 10 V | 10 V = 10-3 Torr |
7B | R7BT | Tradizionale | 10-7 a 10-3 | Da 0 a 10 V | 10 V = 10-3 Torr |
7E | R7EM | Lineare/Decennale | 10-8 a 10-2 | 1,00 V/Decade | 10 V = 10-2 Torr (da 4 a 10 V) |
7E | R7EL | Logaritmica | 10-8 a 10-2 | 1,67 V/Decade | 10 V = 10-2 Torr |
7E | R7Fx | Lineare | Da 10-2 a 10x | Da 0 a 10 V | 10 V = 10-7<-x<-2 Torr |
7F/FC/FCS | R7FM | Lineare/Decennale | 10-11 a 10-2 | 1,00 V/Decade | 9 V = 10-2 Torr |
7F/FC/FCS | R7FL | Logaritmica | 10-11 a 10-2 | 1,00 V/Decade | 9 V = 10-2 Torr |
7F/FC/FCS | R7Fx | Lineare | Da 10-2 a 10x | Da 0 a 10 V | 10 V = 10-8<-x<-2 Torr |
15. This process can be repeated as many times as necessary for different sensors until all of the desired analog outputs are changed.
Prodotti correlati
- Design configurabile dal cliente
- Comunicazioni digitali RS-232/RS-485
- Supporta fino a 8 set point di relè
- Unità di misura selezionabili