説明
This application note explains the process for changing the MM200 analog output settings from a Windows 7 PC. The serial communications program Tera Term must be installed prior to following these instructions, and a serial to USB converter must be purchased. If you don’t have Tera Term installed, click here to download.
指示
1. Plug the serial to USB converter into your PC.
2. Open the Start Menu.
3. Open the Control Panel.
4. Open Hardware and Sound.
5. Open the Device Manager.
6. Expand the Ports (COM & LPT) drop down.
7. Determine the COM port assignment for your USB to serial converter, in this example the converter is assigned to COM3.
8. Open TeraTerm.
9. Open the Setup menu and select the Serial port… option.
10. Change the Port setting to the COM port for your USB to serial converter, in this example it is COM3.
11. Ensure that the remainder of the settings are the following, then select OK:
- ボーレート。9600
- データ。8ビット
- パリティ:なし
- 停止:1ビット
- 流れ制御:なし
- 送信遅延。0msec/char、0msec/line
12. Open the Setup menu and select the Terminal setup… option
13. Ensure that the settings are the following, then select OK:
- 受け取ります。CR+LF
- 送信します。CR+LF
- ローカルエコーをチェック
14. Send the following commands to change the analog output setting, this example changes the 7B output to Linear (<CR> is equivalent to pressing the Enter key). A full list of commands and analog output options can be found in the table below.
- R7BN<CR>
- SE<CR>
センサー | コマンド | 名前 | レンジ(Torr) | V/DIVISION | 説明 |
1E/F | アールワンエン | リニア | 1/100~1000/10,000 | 0~10V | 10 V = 1000/10,000 Torr |
1E/F | アールワンイーエム | リニア/10年 | 1/100~1000/10,000 | 2.00 V/10年 | 10 V = 1000/10,000 Torr |
1E/F | アールワンエル | 対数 | 1/100~1000/10,000 | 3.33 V/10年 | 10 V = 1000/10,000 Torr |
2A | R2AN | リニア | 十対三対一 | 0~10V | 10 V = 1 Torr |
2A | R2AL | 対数 | 十対三対一 | 3.33 V/10年 | 10 V = 1 Torr |
2A | R2AT | 伝統的な | 十の三から二十の三 | 0~10V | 10 V = 10-3Torr |
2A | R2AR | リニア 改訂版 | 十対三対一 | 0~10V | 10 V = 10-3Torr |
3F | R3FM | リニア/10年 | 十の十一一から十の二まで | 1.00 V/10年 | 10 V = 10-2Torr |
3F | R3FL | 対数 | 十の十一一から十の二まで | 1.00 V/10年 | 10 V = 10-2 Torr |
3F | R3Fx | リニア | 十の二から十の倍 | 0~10V | 10 V = 10-8<-x<-2 Torr |
4A | R4AN | リニア/10年 | 十三から千まで | 1.00 V/10年 | 10 V = 1000 Torr |
4A | R4AU | リニア | 十対三対一 | 0~10V | 10 V = 1 Torr |
4A | R4AT | リニア | 十中八九 | 0~10V | 10 V = 10 Torr |
4A | R4AL | 対数 | 十三から千まで | 1.67 V/10年 | 10 V = 1000 Torr |
5A/B/C/D/E/F | R5AN | リニア | フルスケール | 0~10V | 10 V = フルスケール |
5A/B/C/D/E/F | R5AL | 対数 | 3十年 | 3.33 V/10年 | 10 V = フルスケール |
7B | アールセブンビーエム | リニア/10年 | 十中八九 | 2.00 V/10年 | 10 V = 10-3Torr |
7B | アールセブンビーエル | 対数 | 十の六から十の三 | 3.33 V/10年 | 10 V = 10-3Torr |
7B | アールセブンビーイー | 拡張対数 | 十中八九 | 2.50 V/10年 | 10 V = 10-3Torr |
7B | アールセブンビーエヌ | リニア | 十の六から十の三 | 0~10V | 10 V = 10-3Torr |
7B | アールセブンビーティー | 伝統的な | 十中八九 | 0~10V | 10 V = 10-3Torr |
7E | アールセブンイーエム | リニア/10年 | 十中八九 | 1.00 V/10年 | 10 V = 10-2Torr (4~10 V) |
7E | アールセブンエル | 対数 | 十中八九 | 1.67 V/10年 | 10 V = 10-2Torr |
7E | アールセブンエフエックス | リニア | 十の二から十の倍 | 0~10V | 10 V = 10-7<-x<-2 Torr |
7F/FC/FCS | アールセブンエフエム | リニア/10年 | 十の十一一から十の二まで | 1.00 V/10年 | 9 V = 10-2Torr |
7F/FC/FCS | アールセブンエフエル | 対数 | 十の十一一から十の二まで | 1.00 V/10年 | 9 V = 10-2Torr |
7F/FC/FCS | アールセブンエフエックス | リニア | 十の二から十の倍 | 0~10V | 10 V = 10-8<-x<-2 Torr |
15. This process can be repeated as many times as necessary for different sensors until all of the desired analog outputs are changed.